4-Wire Manifold Valve Actuator

ITEM NUMBER : 260166 | Radiant Heating

Gray position indicator provides visual verification of the actuator’s position. When the actuator is off and closed, the gray indicator is flush with the top of the actuator. When the actuator is on and open, the gray indicator will rise out of the top of the actuator and be visible from the side.

FEATURES

Travel distance of actuator 2.5 mm
Red pull-out tab is provided to allow easy installation
Dry-contact end switch is built in to the actuator
End switch can be used to operate 24VAC (2 amps max)
24VAC 'thermal motor' heating element melts a wax cartridge, allowing the actuator to open when there is a call for heat (power on)
Operation takes 3-4 minutes
4 wires: blue/brown – apply 24VAC power; green (2) – end switch
Length – 40" (100 cm)
Actuator not recommended in ambient temperatures above 140 °F (60 °C)
Ambient operating temperature range of 32 to 140°F (0 to 60°C).
Low power draw: approximately 2VA in operation
Maximum 4.5VA when first powered
Maximum 8.7 psi (0.6 bar)