Wet Switch Flood Detector

ITEM NUMBER : WS-1 | Controls & Accessories

A solid state control designed to help prevent flooding, damage to carpets, walls, furniture, ceilings, and more.

Built-in test and reset button for easier installationTurns system off when detecting moisture due to condensate or drain leaks
One or two drops will cause Wet Switch to turn off a unit, alerting a serviceman to a moisture problem
A lit LED indicates the Wet Switch is activated and has turned the unit off
Reset simply by drying the absorbent pad with a paper towel and pressing the reset switch
Connects to 24 VAC
More than one unit may be connected to a system. 2 amp contact rating
A high tech hydrophilic pad with polymeric fiber quickly draws water into the sensor array using proven capillary technology
Integral feet raise the hydrophilic pad and sensor array off the drain pan slightly to prevent nuisance tripping and pan corrosion (metal pans only) from interfering with the sensor array
Multiple unit connectivity allows for multiple Wet Switches to be connected in series to adequately cover large drain pan areas
Power supply to the Wet Switch® is 24VAC, the standard power available on most air handler units
The double throw relay allows for wiring to interrupt the system and to sound an alarm (by others) when moisture is detected
A high tech array of multiple stainless steel sensors detects even a minimal amount of water drawn into the hydrophilic pad
Proven electronics prevent mechanical failure in an aggressive operating environment
When the Wet Switch® activates, it locks out the call for cool circuit on the air conditioner until the switch is manually reset